Patio Doors Repairs

Patio doors provide homeowners with natural light and fresh air. They also increase the value of a home. However, over time they can develop issues that require immediate attention.

Understanding how patio doors work can help homeowners communicate with a contractor regarding the issues they face. Here are some common patio door repairs:.

Rollers that are not aligned

Sometimes the sliding patio door can become stuck and it's not easy to get it open once more. Most of these uncooperative sliding patio doors can be repaired easily by a little oiling and cleaning, unless a structural problem is present. Most often, dirt in the lower track can cause the rollers and bottom track to become misaligned. In this case it is necessary to clean the track and apply a light coat of lubricant so that the rollers glide smoothly.

The misalignment can be caused by damage or wear to the hinges that connect the door panels that house some of these rollers, springs (whether extensions or torsion) and cables that lift the door. When worn or damaged, these components can affect the alignment of the rollers, leading to resistance, as well as the door being heavier or having higher energy bills. Regular maintenance checks and inspections by a professional can help ensure that these components work in harmony to keep your patio door operating smoothly.

To verify the alignment between rollers, set up the crow's feet at the one end of the track. use a tramming stick to sweep across both rollers, recording the distance each travels. Repeat the same process at the opposite end of track and divide by two to get the alignment of the rollers (Photo 1). This method is not as precise as using pi tapes to measure diameter directly, but it's faster and easier than measuring each rail with a level or carpenter's level.

Another option to check the alignment of the rollers is to remove the head stop, which is a flat plate on the door jamb at bottom of the frame that blocks the rollers. This requires removing any removable grilles or shades, and when the door is heavy, obtaining assistance in this process. After removing the head stop, remove the head track adjusters screws by securing them with a screwdriver. After reinstalling your assembly by aligning each roller adjustment screw to the hole that it is accessible through, and tapping it with a Hammer.

Tracks that are damaged or dirty

patio door repair company near me doors that slide can serve as magnets for debris, dirt and other elements outside. They can also be prone to misalignment and other issues that may require professional repair services. To prolong the lifespan of your patio door lock repair door, finding and fixing these issues in the early stages is crucial.

One of the mperature change dramatically. These issues are easy to fix when caught early.

A quick glance at the glass will aid in determining what kind of repairs are required. Glass cracks are typically caused by impact or stress. They are more difficult to fix than normal chipping on the surface. A professional may need to re-lead the panel. This will require the removal of the glass, cleaning it, and replacing the broken pieces. To help match the new glass with the old, professionals require accurate documentation of how the piece looked at the time.

Plastic epoxy can be used to fill a crack. It is available at a hardware store, or in the home improvement section. A professional will use the soldering tool to melt the plastic and then apply it on the crack. Once the plastic has cooled it is then removed by the professional any excess.

If the glass crack is not too large, there could be a chance to repair it using clear sealant. You can buy this type of product from any hardware store. It is essential to thoroughly dry the crack before applying sealant. This will ensure that the repair patio door is successful. A hair dryer or another fan can be used to speed up this procedure.

Weatherstripping that is damaged

A weather stripping that is worn out is not just unsightly and a security risk, but it also allows air from outside to enter and cold or hot air to escape. A simple fix with a new piece of weather stripping could save you money while keeping your home more comfortable.

First, ensure you have all the necessary tools and materials. This includes a new weather stripping kit, or adhesive/caulk sealant (depending on your chosen repair method) tools, scissors, pliers, utility knife, and a pair of gloves or goggles that are protective. Remove the old weather stripping by cutting through the end piece and pulling it up using any screws that are attached, if necessary. Then remove any pieces still left over with pliers or a pry bar.

If you decide to replace the weather stripping, start by measuring the distance around your door frame. Use the measurements to determine the size of weather stripping you require. Make sure to leave some extra length for later fine-tuning. Once you've found the perfect size you can apply the adhesive backing and press it against the frame. If desired, tack it in place using a small nail or hammer.

Apply wood filler to the frame to fill any divots or holes. Let the filler dry completely before applying any paint. Ideally, it's best to apply oil-based paint over the filler, however latex paint will work too.

Last but not least, make sure you clean your sliding tracks and doors regularly. This will avoid future issues like sticking. Maintaining and repairing your patio doors will ensure that they remain functional, attractive and energy-efficient. By doing so you can enjoy the great outdoors with confidence and save some money in the process! Happy home-fixing!