Allowing your cat to go in and out of the house whenever it wants is an excellent way to keep your pet active and mentally engaged. A flap can help reduce toileting incidents by making it easier for the cat to leave the home when necessary.

Take a look at the Door

A cat flap lets your pet move around as they want without having to open the door. This makes it perfect to keep them in the house when you're at home or away and helps keep unwanted pests from the home as well!

It is important to take measurements of the door to ensure that you have the correct size cat flap. There are various sizes available. This will ensure that you purchase the right size to fit inside your door made of upvc, otherwise, it might be too small or too large and your cat will have trouble using it.

Get a ruler and measure the width at several places along the edges of the door. Also, take measurements of the door's height in a few spots. A door that is too high will make your cat flap cost near me do an acrobatics routine each time it is tempted to use the flap.

If you're not sure of how to measure the door, it may be best to ask for assistance from a glazier, or someone who is familiar with this kind of work often. They can determine if your door is suitable for cat flaps and can help you decide on the size of flap to buy.

Mark out the shape of your hole on the door after you have taken your measurements. This will give you an idea of how to cutting the hole out and will stop you from making mistakes that could cost you money in the end!

You must also ensure that the hole you're making is in the right place. If you're installing a cat flap to an outdoor door, it's crucial that the hole does not be too close to hinges. This could result in leakage or issues with the seal.

It is best to leave the task of installing the cat flap on a glass door to a professional glazier. It can be very tricky to insert a cat flap inside an existing pane of glass and you might find that the process causes it to crack and lose its weatherproof seal.

Measure the cat flap install

A cat flap installation bristol flap lets your pet leave and come back whenever they want, without having to leave him on his own. It can also stop the draughts from entering your home, which isn't bad for you or your cat!

However, if you own a uPVC or composite door it could be a challenge to put in a cat flap. These kinds of doors are often made of different materials than standard wooden or uPVC doors and the process of installing them is different, too. Before you decide to install an egress flap to your uPVC or composite door, make sure that it's compatible, and you have checked with the manufacturers as alterations may cause the warranty to be invalidated.

Generally speaking, these kinds of doors are designed to be durable and tough and have insulation built-in. They are more resistant to weather than other types of doors, however it can be difficult to install an animal flap. Get advice from a professional before installing a cat flap onto a uPVC door or composite.

Tooor use. It will typically be identified with this information. If not, ask the staff in the DIY store for assistance. Once you have the hole made then place the flap up against it and push it open to make sure that the flap's action is smooth. If it binds at any point, you can use a filer or a rasp to fix this.

Verify that there aren't gas or electric pipes inside the door you're planning to cut through. Your jigsaw could damage them. Be aware of any handles or other fixtures on the door Fitting a Cat flap in a upvc door that will need to be removed in order to install the cat flap. Be cautious not to damage these items during the process.

Most people who fit the cat flap themselves have an ordinary solid uPVC door and won't have to deal with any of these issues. If your door is constructed of wood or has a decorative element that isn't easily removed, this can make the job.

For these kinds of jobs, it is important to get advice from a cat flap fitter. It is important to complete the job correctly to avoid problems in the future. It is crucial to get it right, as getting it wrong could damage the door and invalidate the warranty.

Fit the Flap

Once you've got your hole drilled, put the flap on to test if it fits and is able to open easily. If you notice any points which catch or stick to the wall, use a hand file or sandpaper to file them down until they are able to fit and open without any problems. Make sure that the flap sits flush with the door too.

Some kits come with a template for this however, if it doesn't provide a template, you could make use of a piece of thin paper instead, something like tracing paper ideally. Lay the paper against the door and mark a line where you will need to place the flap (this will serve as your cutting guide). Mark four screw holes on each corner of the flap using the pencil marks you created on the door. These will be the screw holes you'll need to use to fix it in place.

Most uPVC doors are strong and therefore simple to cut into. If your door is made of composite or GRP the process can be more difficult. If you're not comfortable with this, it's best to hire an expert. They will also be able to provide you with advice on whether or not your particular door is suitable for installation of a cat flap.

You can install the cat flap onto composite doors but it's important to check with the manufacturers or a professional joiner before you do so since any modifications to these doors could void the warranty. If you do decide to carry out the work yourself, be aware that this can be messy and possibly hazardous task.

You'll require a saw or grinder to cut through composite doors, rather than only the GRP. Be aware that this can be extremely dangerous work and you'll need to take extreme care not to damage the door or yourself since it's extremely fragile. It's also worth noting that cutting a hole in any kind of glass door is a lot more difficult than making the same modification in a uPVC or solid wooden door.