Patio Door Lock Repairs

Over time, patio doors go through wear and tear which can result in lock malfunctions. There are fortunately, a number of easy and efficient methods that can restore your uPVC patio door's security.

These quick fixes will ensure your home is secure no matter if you adjust the lock or clean the locking mechanism.

Clean the Lock

Although patio doors are an excellent way to bring the outside in and keep out the elements however, they can also pose an issue for security if your lock isn't working as it should. Over time wear and tear, extreme cold and hot weather, dirt and debris can cause damage to the lock on your patio door and cause it to become difficult to open. Fortunately, with a little care you can ensure that the locks on your patio doors repairs door always function effectively.

It is important to first clean the patio door lock and all moving parts. This will help remove any dirt and coatings that could hinder the lock from working in the way it should. Begin by wiping down all the moving parts on your patio door lock using a damp cloth. Then you can use a scouring paper or a rough damp cloth to scrub the dirt-infested areas of the door and frame. Then, wipe the lock down with a dry towel to get rid of any remaining moisture. Let it air dry before you use it.

If your patio door is equipped with pin-tumbler locks, you can apply powdered Graphite on the key. You can also use a Teflon oil like WD-40 Multi-Use Product. This kind of lubricant can be applied quickly and does not dissolve over time. If you're unable to locate a suitable lubricant You could try using a pencil that has an extremely thick tip. Put the pencil into the lock and jiggle it around a bit to distribute the graphite.

Regular maintenance is also necessary to keep the tracks of sliding patio door repair near me patio doors clear from dust, dirt and debris. They are particularly susceptible to ice, snow, and other particles, which can cause them jam or bind. This could make it difficult for your patio door to open and close.

Tracks for sliding patio doors and rollers can be cleaned by removing weather stripping that is damaged or dirty and cleaning them before installing it. The same can be done to patio door lock repair door rollers which can be wiped down and then sprayed with a non-stick lubricant that will allow them to move freely.

Lubricate the Moving Parts

uPVC french doors, which are similar to sliding patio glass door repair near me doors, work using 3-4 or sometimes five-point locking mechanisms, which include the handle and lock cylinder operated by a key. T lock and note their dimensions. This information will assist you in finding an alternative that is the same size and is a perfect fit for the hole you have already.

You'll want to identify the mortise lock, and then examine it for bends, scratches or other damage that needs to be fixed. A damaged or bent latch is more likely than one that's frequently used to break. Replace the lock if it displays indications of damage.

Once you've inspected the lock and identified which kind of replacement you require, it's time to start working on the actual repair. The old spindle and handle should be removed from the patio door. Install the new handle. Start by putting in the handle inside, aligning it with the spindle, and then securing it with the two bolts or screws which hold it. Install the exterior handle after the interior handle. Once you have completed these steps check the handles to ensure that they open and shut easily and that the latch works properly with the strikeplate.

Check the Strike of the Door.

The strike plate and the door latch are two components that work together to secure the door. Misaligned strike plate and door latches can cause the latch to not latch the door properly. Fortunately, this problem is usually easy to correct.

Check the holes for receiving of the strike plate to make sure they are free of obstructions, such as dirt or plastic plugs. Remove the screws that hold the strike plate. This allows it to move vertically, but not separate it from the frame. Then, adjust the strike plate so that its receiving holes align with the latch hooks on the door latch. Once the strike plate is adjusted tighten all screws and test to see whether the door closes smoothly.

Door strike plates can be difficult to access for homeowners with sliding patio doors, but they're crucial to lock and unlock your door. These metal plates are located at the top and bottom jambs of the door, where they support its latch. Then, the door latch is able to slide into the strike plate, creating an airtight seal when closed. If the strike plate is damaged, rusted, or not properly installed, it could hinder the latch from locking the door securely.

One of the most common reasons for a patio door lock to stick or not close is a misalignment between the latch and the strike plate. The easiest way to check for this is by performing the "lipstick test." Apply some lipstick on the edge of the deadbolt and apply masking tape over it. The lipstick will leave the mark when you shut the door. This will reveal exactly where the latch connects to the strike plate. If the mark is too high or low you can adjust the strike plate.

If your patio door locks for sliding aren't working correctly, they can keep your home safe from burglars. It is imperative to resolve this issue as quickly as you can. Follow these easy steps how to repair patio door lock fix your patio door lock and restore its functionality.