Cat flaps allow your pet to move around at their own pace without you having to let them in or out. They also help stop your cat from urinating inside the house.

It is simpler to install a cat flap on a upvc panel than on a glass one but you'll require some expertise and correct tools.

Take a measurement of the door

Fitting Cat Flap In Upvc Door Panel a cat door in a front door could be difficult, but provided that the cat flap is the right type and you follow the instructions it shouldn't be too difficult. We will show you how to draw the shape and then use an jigsaw to cut the door's opening. Then we'll complete the job by affixing the cat flap. This will ensure the flap stays in position and shields the doors from the damage caused by wind and rain.

The first thing to do is determine the width of your pet to get an accurate measurement of the size of cat flap bifold doors flap you'll require. This will allow you to choose a cat flap that is large enough to allow your pet to walk into the house and leave without having to open the door each time.

Once you have the measurements, you can determine the area on the door where the template should be positioned, usually this is done with an X, but some kits come with an illustration that outlines the location to drill, if yours does then stick it to the door and draw a line around it. If your door has moulding or sill on the bottom of it ensure you have clearance from these to keep your cat safe and prevent them gaining access to your home.

Next put on your eye protection and dust mask, and using a jigsaw begin to cut along the line you penciled in, but don't press the blade too hard as this can cause it to cut faster than you'd like it to. If you own a set square then make use of it to verify that you are cutting correctly and to make sure the hole is a good rectangular shape. Once you are satisfied with the shape, you can begin to remove the remaining door material.

Draw a Line

The cat flap is a great method to allow your pet to go in and out without worrying about them coming in with a visitor, or leaving unwanted gifts in the house. It also reduces drafts and helps keep the temperature in your home steady. Installing a cat flap on your door might seem difficult to those who haven't done it before. Many people call an expert carpenter or joiner to do the work. This is a viable option, however you can do it yourself, provided the tools are in order and the directions are followed.

It is much easier to do on a wooden door, but it is possible with uPVC. However you should be cautious not to damage the doors because this will invalidate your guarantee. First, you need to take measurements of the door to make sure it will accommodate the new cat-flap. This should be easy enough for an ordinary uPVC door, however you may need to take more care if using an insulated or composite type of door since these are more difficult to cut than solid uPVC panels.

The next step is to determine the height of yois important to leave a bit of material to cover the wall of the flap. However, removing too much can cause issues or even damage to the door frame.

A upvc door may have a metal frame or panel that could interfere with the microchip cat flap, and if this is the case, you'll need to cut an oversize hole to ensure the metal doesn't come into contact with the wall of the cat flap, if this is done it is important to fill in the gap and seal it with water.

If you want to install a cat flap in windows made of double-glazed or upvc with frames made of metal you'll need to talk to a specialist. They can offer you a brand new piece of glass with the hole already pre-made for the cat flap. This will be cheaper than trying to fit a cat flap in an existing pane that was not designed specifically for this purpose.

Place the Flap

Cat flaps give your pet the freedom to go and come whenever they like, allowing them to relax at home whenever they'd like. However, if you have an uPVC door, it may be difficult to install a cat flap, especially if you don't own glass panes that could be cut to fit one. If you are willing to install a half-glazed uPVC replacement panel, it's possible to install a cat flap. It's not as simple as just cutting a hole in the door though and there are some things you'll need to take care of first to ensure that it's safe.

A uPVC, GRP or composite door panel is typically made up of a flimsy plastic outer skin that is bonded to a soft, polystyrene core that is insulating. The material is quite fragile and care must be taken when cutting into it to avoid damaging. This kind of door typically comes with a template drawing that you can use as a reference for cutting the hole in the door.

Once you have marked the position of the hole in your door, it's now time to fit the cat flap. You can choose from a variety of designs, from simple push-button models to ones that are microchip-activated and allow your pet in. However, regardless of what kind of cat flap you pick, it's crucial to ensure that your cat flap installer near me is able to use the flap without getting stuck outside in the rain.

It is a good idea to choose circular fittings instead of one that is square, because circles are more securely cut into the door glass. This is because square holes are more likely to crack the glass when they're drilled. This is also a safer option since you don't have to drill into the toughened glass, which could break and hurt your pet or your family members. This is especially important if you have child or elderly person in your home who may be hurt by shards of glass.