Cat flaps allow your pet move around at their own pace, without you needing to let him in or out. They also prevent your cat from urinating inside the house.

It is easier to install the cat flap on a upvc panel than one made of glass but you'll require some knowledge and right tools.

Measure the Door

Installing a cat door into the front door is difficult however, as long as the cat flap is of the correct one and you follow the directions you can make it less difficult. We will show how to trace the shape, use a jigsaw to cut out the area in the door and Fitting Cat Flap In Upvc Door Panel then finish off the job by attaching the cat flap to the door. This will ensure the flap is in place and also protects the doors from the damage caused by wind and rain.

The first thing you need to do is measure the width of your pet in order to determine an accurate estimate of the size of cat flap you'll require. This will ensure that the flap is big enough to allow your pet to go inside and out of the house without having to open and close the door every time, but it is also small enough to keep them from going too far in either direction.

If your kit comes with an illustration of the location to drill, you can put it on the door and then use a pencil around it. If your door has a sill or moulding along the bottom edge ensure you have enough clearance from these because this will ensure your fitting cat flap in upvc door panel's safety and stop them from gaining access to your home.

Then put on your eye protection and a dust mask. Then using a jigsaw, begin to cut along the line that you have pencilled in, don't try to push the blade too hard because this can cause it to cut faster than you would like it to. Use a set square to ensure that you are cutting the material properly and that the hole is a rectangle shape. When you are happy with the result, you can take the door material off.

Draw a Line

The cat flap lets you to let your pet inside and out without worrying about unwanted visitors or unwanted gifts. It also stops draughts and helps to keep the temperature inside your home stable. However, putting an animal flap on your door could be an intimidating task for those who haven't done it before, which is why many to hire an expert joiner or carpenter to do the job. While this is certainly an option, it's possible to complete the task yourself if you own the right tools and follow the instructions with care.

While this is much simpler to accomplish with a wooden door, it is still possible in uPVC doors, but you must be careful to avoid damaging the doors, as this can end the warranty. The first step is to take measurements of the door to make sure it will accommodate the new cat-flap. This should be easy enough when you have an ordinary upvc door panels cat flap door, however you might need to take more care if using an insulated or composite type of dooh is quieter and simpler to use.

It is crucial to only remove the material required for the fitment of the cat flap. It is essential to leave a little extra material to make the wall thickness of the flap. However, removing too much can cause issues or even damage the door frame.

If the upvc door features a metal panel or frame, it could interfere with the microchip flap. In this scenario you'll need to create an extra-large hole to ensure that the metal doesn't get in contact with the walls of the flap.

If you're planning to install the cat flap onto a upvc door or double glazed window with a frame made of metal, you will need to speak to a professional who can provide you with a brand new pane of glass that already has the hole for the cat flap already drilled in it. This will be less expensive than trying to install a cat flap in an existing pane that was not designed for this purpose.

Install the Flap

cat flap in upvc door panel flaps allow your pet the freedom to go and come whenever they want and let them relax in the house when they'd like. However, if you have an uPVC door, it might be difficult to fit a cat flap, particularly in the absence of a glass pane that can be cut for one. If you are willing to install a half-glazed uPVC replacement upvc door panels with cat flap panel, it's possible to add an additional cat flap. It's not as easy as just making a hole in the door though and there are some things you'll need first to ensure it's secure.

A composite, uPVC, or GRP door panel usually has an flimsy plastic outer layer joined to a soft polystyrene core that is insulating. The material is fairly fragile and care must be taken when cutting through it to avoid causing damage. This type of back door with cat flap fitted typically includes a template which you can use as a reference to cut the hole into your door.

After you have carved out the opening in your front door, it is time to install the cat flap. You can buy and fit various models including basic push-button operated models to ones that are activated by microchips that only let in your pet. However, no matter what kind of cat flap you select, it is essential to ensure that your cat can comfortably use the flap and not get stuck outside in the rain.

It's a good idea to select circular fittings rather than a square one, as circles are more securely cut into door glass. This is because square holes make glass more vulnerable to cracking if drills are used on it. This is also a safer option because you won't need to drill into the toughened glass that could break and cause harm to your pet or your family members. This is particularly important if you have a child or an elderly person living at home who could be hurt by shards of glass.